You are here: Industrial Automation > Data Acquisition (DAQ) & Control > Motion Control I/O Modules > Distributed Motion Control Solutions > AMAX-2243/YS2

AMAX-2243/YS2

Print page

Email page

4-axis AMONet RS-485 Motion Slave Module for Yaskawa Sigma-II

Main Features

Max. 20 Mbps transfer rate
Max. 6.5 Mhz, 4-Axes pulse output
28 bits counter for incremental encoder
2~4 axes Linear interpolation
2 axes circular interpolation
T-curve and S-curve velocity profiles support
Change speed on-the-fly
Easy installation with RJ45 phone jack and LED diagnostic
Easy installation for servo or stepping motor driver
Suitable for DIN-rail mounting

Larger Image(s)

Datasheet (PDF)

Manual/ Driver/ BIOS/ FAQ

Introduction

AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 distributed motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable SCSI-20P and plug this cable into the motor driver and motion slave module.

Specifications

Part Number

AMAX-2243/YS2-AE

General

Connectors

1 x SCSI-50
1 x 40-pin Terminal

Advanced Function

Emergency Stop Input Channels

Encoder Channels

General Purpose DI Channels

General Purpose DO Channels

Home Input Channels

Limit Switch Input Channels

Position Compare Event

Serveo On Output Channels

Slow Down Limit Switches

Ordering Information

Part Number

Description

AMAX-2243/YS2-AE

4-Axis Motion Slave for Yaskawa Sigma 2

Accessory

	Part Number	Description

	PCL-10220M-2E	SCSI-20 Ribbon-Type Cable with 2 connectors, 2m

Contact Information

Office	Phone	Email

Advantech U.S.A., Industrial Automation Group	1-800-205-7940	eAinfo@advantech.com

Advantech Headquarters, Industrial Automation Group		IA@advantech.com.tw

Advantech Europe Customer Care Center, Industrial Automation Group	00-800-2426-8081	eAcustomercare@advantech.eu