MyAdvantech Registration

MyAdvantech is a personalized portal for Advantech customers. By becoming an Advantech member, you can receive latest product news, webinar invitations and special eStore offers.

Sign up today to get 24/7 quick access to your account information.

BB-FOSTCDRI-PH-SC

Heavy Industrial Serial to Fiber Optic Converter - single-mode SC
  • Converts serial data signals to multi- or single-mode fiber
  • 2kV, 3-way isolation (input, output, power circuits)
  • Data rate: 9.6 to 115.2 kbps (bit-wise enable)
  • -40 to +85°C wide operating temperature
  • IP30 metal panel mount case (DIN rail adaptable)
  • FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D2
  • 10-48 VDC power source required (not included, sold separately)
  • Note: 2 units required to extend data via fiber optic connection (see datasheet)
Model FOSCTDRI-PH-SC is a premium heavy industrial serial-to-fiber optic converter. Designed for rugged industrial environments, it has been put through some of the most exacting compliance testing in the industry. Meeting IEC 61850-3 and IEEE 1613 requirements, it is suitable for installation in electrical substations. These specifications are more stringent than NEMA TS1/TS2 requirements for transportation applications. Powerful isolation protects equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third level of protection. An external 10-48 VDC power source is required (not included, sold separately). Packaged in a rugged IP30 metal case, this converter converts serial signals to single-mode fiber optic. Bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch. In addition to direct point-to-point connectivity, operation in multi-drop mode is possible. This enables serial devices to communicate with up to 31 others in a fiber ring. Supporting mixed standards, you can replace other converters and add the EMI / RFI protection inherent to fiber optic communications. Note: These converters use a proprietary modulated fiber optic signal. Two units are required to extend the data via the fiber optic connection. Any FOSTCDRi-PH-x converter can (only-) connect to another FOSTCDRi-PH-x converter model at the other end of the fiber optic cable.

Product Specifications Download Spec

  • Part Number
  • Details
General
  • Connector
  • Technology
  • Communication Speed
  • Mounting
  • Interface
  • Power
  • Isolation Protection
  • Temperature
  • Serial Type
  • Temperature (Storage)
  • Humidity
  • Serial Connector
  • Fiber Type
  • Temperature (Operating)
Display
  • LED Indicators
Power Supply
  • Power Requirement

General

  • Connector

    BB-FOSTCDRI-PH-SC Plug-in 5P/15P screw terminal blocks
  • Technology

    BB-FOSTCDRI-PH-SC Serial
  • Communication Speed

    BB-FOSTCDRI-PH-SC Serial: From 9.6 to 115.2 kbps
  • Mounting

    BB-FOSTCDRI-PH-SC Panel
  • Interface

    BB-FOSTCDRI-PH-SC Fiber Optic to RS-232/422/485
  • Power

    BB-FOSTCDRI-PH-SC 10-48VDC
  • Isolation Protection

    BB-FOSTCDRI-PH-SC 2000 VDC
  • Temperature

    BB-FOSTCDRI-PH-SC -40 to 85C
  • Serial Type

    BB-FOSTCDRI-PH-SC RS-232/422/485
  • Temperature (Storage)

    BB-FOSTCDRI-PH-SC -40~85°C (40~185 °F)
  • Humidity

    BB-FOSTCDRI-PH-SC 0 ~ 95%, non-condensing
  • Serial Connector

    BB-FOSTCDRI-PH-SC Terminal Block
  • Fiber Type

    BB-FOSTCDRI-PH-SC Single-mode
  • Temperature (Operating)

    BB-FOSTCDRI-PH-SC -40~85°C (40~185 °F)

Display

  • LED Indicators

    BB-FOSTCDRI-PH-SC Communication and Power

Power Supply

  • Power Requirement

    BB-FOSTCDRI-PH-SC 10~48 VDC

Need more info? Talk to our Online Rep!

Related Materials