TREK-510

ARM-based, In-Vehicle Computing Box

Main Features

ST ARM based STA2062 333 MHz CPU with Win CE
Automotive grade working temperature range (-30 to 70° C)
Rich I/O such as CAN, multi-COMs, isolation 4DI/4DO, line out, Mic in, USB, SD
Built-in RF communication modules, such as GPRS/HSDPA/CDMA
Certifications: CE, FCC, E-mark and MIL-STD-810G, ISO7637-2, SAE J1113, SAE J1455 regulations
Ignition on/off delay; SW detectable/controllable for car power management
Built in G sensor for active security system

Datasheet (PDF)

3D model online view

Manual/ Driver/ BIOS/ FAQ

Introduction

The TREK-510 is a dedicated box computer for industrial vehicle fleets, transport trucks, buses and taxis. TREK-510 combined with a variety of I/O connectors can be connected to devices like OBD-II or TPMS (Tire Pressure Monitoring System). Built-in wireless communications-WWAN enable TREK-510 to send important driver/vehicle/location/car information back to the control center. TREK-510 can also operate in extreme environments with features like a wide working temperature range (-30 to 70 degrees) and anti-shock/vibration design. TREK-510 also uses a special design to handle the critical issue of in-vehicle power. Special power protection (ISO7637-2/SAE J1455 Class A/ SAE J1113) and car power management software (Ignition on/off, delay on/off, low battery monitor) prevent electrical noise and surges from impacting the system, guarding against damage from transient car power.

Specifications

Part Number		TREK-510-GCEA0E Get Quote Build Now
System	Soc	STM industrial degree STA2062 ARM9-based 333 Mhz RISC SOC
	System Memory	Mobile DDR 128 MB
	Watchdog	Yes
	RTC	Yes, with one time 200 mAh coin battery
	Operating System	Win CE 5.0 English core version as default
Physical	Dimensions	261 x 125 x 59.1 mm
Physical	Weight	1.5 kg
Storage	SD slot	1 x (external accessible)
Display Interface	Smart Display Port	Design compatible with TREK-303L, 7" smart display, the signal includes:- 18-bit LVDS out,- 1 x RS-232,- 1 x audio line out,- 1 x USB Host,- 12 V @ 1 A output
I/O	CAN	1 x CAN 2.0 A/B by DB9 with J1939 protocal
	USB Host	1 x USB 2.0 host port by type A
	USB Client	1 x USB Client by Mini Type AB
	Mic In	1 x RCA jack
	Speaker-out	1 x RCA jack
	COM Port	COM 1&2: 2 x Full Function RS-232, 5 V/12 V @ 0.5 A, ping9, by jumper selection;COM3: 1 x 4-wire RS-232/485 (controlled by software, 5 V/12 V @ 0.5 A, ping9, by jumper selection
	Isolation DI/DO	4 x Isolated dry contact digital inputs from DB9 connector (2500 Vrms protection);4 x relay driver from DB9 connector
Communication	WWAN	GPRS - Cinterion MC55i: Support GPRS class 10 (Quad-band);CDMA -Sierra Wireless MC 5728V: Support EV-DO REV A, EV-DO,CDMA (1900 MHz, 800 MHz);HSDPA -Sireea Wireless MC 8790V: Support EDGE, GPRS, GSM, HSDPA, HSUPA (GPRS/EDGE class B, multislot class 12)
GPS	RF Receiver Type	32 Channels (built-in), GPS L1 frequency, C/A code;50 channels, GPS L1 frequency (option)
	Cold Start	39 s;29 s
	Warm Start	33 s;29 s
	Hot Start	< 1 s;< 1 s
	AGPS	3 s;< 5 s
	Acquisition	-145dBm;-160dBm
	Protocol	NMEA Input/output, ASCII, 0183, 2.3 (compatible to 3.0)
	Antenna	SMA connector for external antenna
G-sensor		Yes, built-in
LED	LED indicator	Power (Red), GPS operation (Blue), WWAN link (Green), Status (Green)
Car Power Design	DC-Input	Supports 12/24V car power systems (6V ~ 36V wide DC input, ISO 7637, SAE J1455, SAE J1113)
Car Power Design	Power Management	Power on/off delay;Power on delay, 2 sec by default;Power off delay, 5 sec by default;Delay time allow control by SW configuration;Low voltage protection;Supports normal, idle (turn off LCD backlight only) & suspend mode
Environment	IP Rating	IP31
	Operating Temp.	-30° C ~ +70° C
	Storage Temp.	-40° C ~ +85° C
	Vibration/shock	MIL-STD-810G, Method 516.5
	EMC	CE, FCC, IC
Certification	Safety	CE, CB
Certification	Vehicle Power Regulations	E-mark, SAE J1455, SAE J1113, ISO7637-2, compliance
Mechanical	Material	Top cover (Aluminum extrusion);Side cover (PC);Bottom & I/O cover (metal)