Step1: Please check Memory address and IRQ settings of your CAN card first, if the settings are wrong or conflicted with other devices, you would get into trouble when you open your CAN port. Therefore, please make sure CAN card's Memory address and IRQ settings are not occupied by other device under WinNT diagnostic window.
Step2: Please go to BIOS setting to make sure the IRQ you want to use on CAN card sets as ISA under "PNP and PCI setup"
Step3: Run example program such as 841M.EXE to check CAN port is ok for open. After that, you can see PCL-841 is appeared under WinNT diagnostic window.
Note:
Error code of CANPortOpen 0 => Success, 1 => Fail
Thank you for your feedback
We will look over your massage and get back to you soon if you need further assistance!