Adding Static IP Routes and Tables for the Spectre Router

Question

Accepted Answer

You can add static IP routes and tables to the Routers routing table by putting them directly in Startup Script in the Routers configuration or you can use a Telnet/SSH tunnel to access the routers CLI. The router runs on Linux and commands can be found from Linux Man Pages. A few simple examples of adding an IP route or table can be found below: #Add routing IP address 192.168.3.1 through gateway 192.168.1.2 Ip route add 192.168.3.1 via 192.168.1.2 #Add routing networks 192.168.3.0/24 through interface eth0 Ip route add 192.168.3.0/24 dev eth0 #Redirect incoming TCP connections to port 8080 on IP address 192.168.1.2 and port 80 iptables -t nat -A napt -p tcp --dport 8080 -j DNAT --to-destination 192.168.1.2:80 These are examples from the Commands and Scripts Guide. The Guide can be downloaded on the link below. Commands and Script Guide

Commands_and_scripts_for_SPECTRE3G_routers_1413

2017-10-17

구분		수집항목	이용 목적	이용∙보유기간
1:1 문의	필수	이름, 이메일, 전화번호, 회사명, 국가, 상담내용	고객의 문의 대응 및 분쟁해결 등을 위함	소비자의 불만 또는 분쟁처리에 관한 기록: 3년
	선택	제품, 시리얼넘버	효율적인 상담 대응	소비자의 불만 또는 분쟁처리에 관한 기록: 3년
	선택	뉴스레터 수신 동의 여부	신규 서비스/상품, 할인 이벤트 안내	법정 의무 보유 기간

America Region

Europe Region

Asia Pacific

Africa & Middle East

MyAdvantech Registration

Bunu mu demek istediniz

MyAdvantech Registration

Gelişmiş Video Çözümleri

Business Alliance Partner

Sharing & Training

Events

Adding Static IP Routes and Tables for the Spectre Router

2018-10-26 FAQ Document No.1-00000430

How do you add a Static IP Route or Table to the Spectre Routers?

Commands_and_scripts_for_SPECTRE3G_routers_1413

Download

Thank you for your feedback

Advantech ile İletişime Geçin

0212-222-0422

Canlı Sohbet

Satış ve Teklif

Nasıl Yardımcı Olabiliriz?

Adding Static IP Routes and Tables for the Spectre Router

Adding Static IP Routes and Tables for the Spectre Router