If user has the default setting on PCX-797, then the problem was caused by I/O address confliction between PCX-797 and PCLSTEST program. Because the default I/O address of PCX-797 and PCL-818 series cards are 300H, the test programs (PCLSTEST or TESTPROG) will write/read 300H when selecting the card type.
Thus, PCX-797 will not works correctly. However, the default I/O address of PCL-812 is 220H. Therefore, the test program will not cause the same problem. Please set the I/O address of PCX-797 to other address and check the problem again
Thank you for your feedback
We will look over your massage and get back to you soon if you need further assistance!