Installing the driver for a Fresh installation of Windows NT 4.0/2000/XP/Server 2003 [Win32bit]
Step1:
upzip driver file to floppy
Step2:
When the Windows NT 4.0/2000/XP/Server 2003 [Win32bit] installation starts, a blue screen appears after the hardware detection message. When prompted to install a third-party driver, press F6.
Note: You only have 5 seconds to press the F6 key during the installation startup. A prompt appears at the bottom of the screen when F6 is active. Press F6 at this time; otherwise, you must restart the Windows 2000 installation process to complete this procedure correctly.
Step3:
When Windows NT 4.0/2000/XP/Server 2003 [Win32bit] starts for the first time, it launches the Found New Hardware Wizard. Click Next. Then, select Search
for suitable driver for my device and click Next again.
Step4:
Insert the driver disk you created in Step 1. Select the floppy disk and click Next. The wizard should find the Adaptec RAID Adapter.
Step5:
Click Next and follow the instructions. Eventually, the installation will require that the system shut down and restart. After the restart, respond to any further instructions as needed to complete the installation.
Windows Pre-install
2005-06-16
Thank you for your feedback
We will look over your massage and get back to you soon if you need further assistance!