Registro de MyAdvantech

MyAdvantech es un portal personalizado para clientes de Advantech. Al registrarse como un miembro de Advantech, puede recibir las últimas noticias sobre productos, webinar y ofertas especiales en eStore.

Inscríbase hoy para obtener acceso rápido a la información de su cuenta.

Registrarse Log In
Botón de panel

How to install ADAM-4550?

2023-01-17 Installation Document No.1-0000033

Related Product:

ADAM-4550

Ver Más Ver Menos

Solution:

  • How to install ADAM-4550?

    Please follow below steps to complete installation and check ADAM-4550.

    1. Please use 2 ADAM-4550s and 1 ADAM I/O module like 4011 ( ID address is 02h).

    2. Connect 4011 to RS-485 of one 4550 with correct wiring. We call this 4550 as "server". Also connect RS-232 of 4550 to host PC.

    3. Before power on and configure slave 4550, please connect "INIT*" and "GND" on server 4550.

    4. Run ADAM4550.exe under Windows environment and choose "Settings ..." , "Local Comm Settings" to select correct COM port and relative configuration you use.

    5. After that, power on slave 4550 and choose "Settings ..." , "Set Adam Configurations" to set server 4550.

    6. We set server 4550 at address "01h", "slave mode", delimiter is "{", data gate is "close" and baudrate is "9600 bps".

    7. After clicking "OK", you will see the yellow LED of server 4550 will blink fast, that means configuration is OK.

    8. Now power off and remove the wire between "INIT*" and "GND", then power on again. When you see the yellow LED starts to blink fast, please remove RS-232 cable from DB9 connector of slave 4550.

    9. Connect RS-232 cable from PC to DB9 connector of the other 4550, this 4550 will be set as "client".

    10.Repeat step 3 to step 7 and we set this master 4550 at address "00h", "client mode", data gate is "close" and baudrate is "9600 bps".

    11. Also need to remove the wire between "INIT*" and "GND", then power on client 4550 again, but don't remove RS-232 cable between it and PC.

    12. Select "Terminal" and choose "Connect". Type some commands for 4011 at left window and check the response from right window. Because ID address of server 4550 is 01h and 4011 is 02h, we can use the following commands to check:
    {01$022, {01#02 or {01$02M.

    13. Then please choose "Generate-Traffics", "Continuous" to send commands from client 4550 to server 4550. While 2 ADAM-4550 modules are communicating each other, you can see the green LED is blinkingas well as the yellow LED.

The content is too difficult to understand The content does not match the title The information is out of date It is not the information I'm looking for The content is empty Download file missing Invalid download link Download speed is slow Others

This field of information is requried

Yes No

This field of information is invalid

This field of information is requried

This field of information is requried

¿Le gustaría suscribirse a las comunicaciones de marketing de Advantech, incluyendo boletines electrónicos, invitaciones a eventos y actualizaciones de productos?Puede darse de baja en cualquier momento.*

Nota: Si ya está suscrito, al seleccionar "No, gracias" se cancelará su suscripción actual.

Required field

¿Acepta el tratamiento de sus datos personales de acuerdo con la Política de Privacidad de Advantech?*

Required field
전체동의 (선택사항 포함)

어드밴텍 이용약관 동의 전체보기*

This field of information is requried

개인정보 수집 및 이용 동의*

This field of information is requried

산업뉴스/적용사례/할인이벤트 이메일 수신 동의

당사는 회원 기반 서비스 제공을 위해 다음과 같이 개인정보를 수집하여 이용, 제공, 파기 합니다.

구분 수집항목 이용 목적 이용∙보유기간
1:1 문의 필수 이름, 이메일, 전화번호, 회사명, 국가, 상담내용 고객의 문의 대응 및 분쟁해결 등을 위함 소비자의 불만 또는 분쟁처리에 관한 기록: 3년
선택 제품, 시리얼넘버 효율적인 상담 대응
선택 뉴스레터 수신 동의 여부 신규 서비스/상품, 할인 이벤트 안내 법정 의무 보유 기간
I have read KVKK Clarification Text and I accept to share with you my personal data*

This field of information is requried

I have read KVKK Clarification Text for the Contact Form Process, I would like to receive Advantech emails and product information. Unsubscribe at any time. Already receiving Advantech Emails? Not ticking this box will automatically unsubscribe you
アドバンテックのプライバシーポリシーに基づき、売買手続き上必要な個人情報をアドバンテックが使用することに同意します。*

This field of information is requried

アドバンテックの製品情報、スペシャルオファー、重要なアドバンテックニュースの配信を希望します。（配信停止はいつでも可能です。）

Contactar con Advantech