我的研華會員註冊

「我的研華」為研華客戶專屬服務平台。成為研華會員,您將收到最新產品資訊、研討會邀請和線上商店特殊優惠。

立即註冊,啟用您的會員服務!

BB-422LP25R
Serial Converter, RS-232 DB-25 F to RS-422 DB25 M, Port Powered

  • Converts RS-232 TD and RD to balanced RS-422 signals
  • Extend RS-232 data signals up to 1.2 km (4,000 ft.)
  • Data rate: up to 115.2 kbps baud
  • Connectors: DB25 M / DB25 F
  • Powered from RS-232 handshake lines - no power supply required
Model 422LP25R, RS-232 to RS-422 converter, converts unbalanced RS-232 signals to balanced RS-422 signals. The power used for this converter is derived from the Transmit Data line (pin 2) and the Handshake Control Lines (pins 4, 5, 6, 8, and 20). The converter can derive power from these lines when they are in the Positive or Negative voltage state. This permits the converter to be used in applications without regard to software control of the handshake lines. If no handshake lines are available and all power must be derived from the Transmit Data line, the converter can drive limited cable lengths. A guide for this condition would be to drive only several hundred feet of transmission line and not to terminate the transmission line with a resistor of less than 1000 Ohms. When more handshake lines are available, longer lengths of cable can be driven. This converter has been tested at 115.2k baud with 1220 meters (4000 feet) of cable.

規格 下載規格表

  • 產品料號
  • 相關訊息
General
  • Serial Type
  • RS-232 Connector
  • RS-422/485 Connector

General

  • Serial Type

    BB-422LP25R RS-422
  • RS-232 Connector

    BB-422LP25R DB25 Female
  • RS-422/485 Connector

    BB-422LP25R DB25 Male

想瞭解更多嗎?歡迎線上詢問。研華專業技術代表 24 小時在線。