我的研華會員註冊

「我的研華」為研華客戶專屬服務平台。成為研華會員，您將收到最新產品資訊、研討會邀請和線上商店特殊優惠。

立即註冊，啟用您的會員服務！

Register Log In
PanelButton
  1. 首頁 /
  2. 技術支援 /
  3. 線上資源 /
[Case Study] Low-Cost Automation and Monitoring in the Die Cast Manufacturing Process

觀看此影片即代表您同意研華科技的隱私權政策。

[Case Study] Low-Cost Automation and Monitoring in the Die Cast Manufacturing Process

2022/3/29
iFactory
Die casting is a metal fabrication process that involves forcing molten metal under high pressure into reusable metal dies. Molten metal processing is energy-intensive, and approximately on quarter of the cost of die-cast products can be traced to some form of energy consumption. The more energy-intense a process is, the greater the cost of the process, so saving energy is of key importance.

There are several techniques and methods for saving energy such as upgrading equipment. Energy efficiency management requires investment in new equipment, but the best energy efficiency results can be achieved if process management and control systems are optimized through automation. With the help of automation, manufacturers can reduce some of the costs of die casting. Automation also provides more consistent results, which means fewer mistakes, therefore increased efficiency.

相關案例

從單點任務到複合功能，研華助攻威剛打造多工多機協作 AI AMR

2026/8/11 應用案例
從單點任務到複合功能，研華助攻威剛打造多工多機協作 AI AMR

研華搭 COMPUTEX 熱潮舉辦全球夥伴大會 力推 Physical AI 與 WEDA 架構

2026/6/4 新聞

研華 COMPUTEX 展現邊緣 AI 實戰力 以 WEDA 串聯 AI Agent 加速跨產業應用

2026/6/3 新聞

聯絡研華