The POS-460 rev.A1 is on-board network chip is UMC-9007 and compatible with
Novell NE2000.
Installation for Windows 95 or Windows 98 procedure:
1.At the true DOS mode(MS-DOS6.22 or Windows95/98 command prompt only), execute
DIAG7C.EXE and confirm Ethernet configuration before run Windows 95 or Windows
98 (Ethernet defaults are IRQ=5 , I/O Address=300h).
2.Run Windows 95 or Windows 98.
3.Select "Start" => "Settings"=> "Control Panel" => "Network" => press "Add"
Button
4.Choose "Adapter" label => press the "Add" button.
5.Choose "Novell/Anthem" "NE2000 Compatible" press "OK" button.
6.Check NE2000 properties IRQ and I/O Address.
7.Then restart your system.
Thank you for your feedback
We will look over your massage and get back to you soon if you need further assistance!